Test sailing the X4⁶ MkII
Haderslev, Denmark. The first X4⁶ MkII was test sailed Friday 30th October. Hull no.1 motored out of Haderslev Fjord after having been rigged and checked during the week in the X-Yachts yard in Haderslev.
By the time the boat reached the beautiful waters north of Årøsund, the late October sun had burned off the fog, and the beautiful Little Belt area appeared as a true gift to the test team. The sails went up for the first time under a blue sky, in a northerly breeze of 6-8 knots, later settling to 10-12 knots and gusting 14-15 towards the end of the day.
Equipped for Performance
Hull no.1 carries a carbon mast from Axxon and an in-boom furling boom from Furlerboom. All sails are from North Sails, Main and Jib in 3Di Ocean and the Code Zero in NPL.
On the water
The crew began with a series of tacks close under the coast. Then setting the Code 0 sailing south, passing the lighthouse on the small island of Årø. From there the course turned east towards Funen, at progressively tighter angles under the same sail.
The first tacks were done in light air 8-10 knots. Conditions in which cruising yachts normally struggle to perform, but the X4⁶ MkII benefits from the very same ingredients as all other X-Yachts, and accelerated effortlessly even in the light conditions.
Seen from alongside, the crew could move the boat through its gears and enjoy its effortless sailing capabilities. Upwind, the boat sailed 7,4 knots at a true wind angle of 38 degrees. Under Code 0 it reached 8,8 knots.
On every point of sail, the boat behaved as expected: balanced, and with plenty of power for the conditions. Upwind, the deep rudder provides good grip and gives the helm a comfortable and well-balanced feeling. It is easy to find your groove and stay in it, which makes the boat a rewarding sailing experience for anyone.
The crew was one big smile after the first day of testing:
The X4.6 Mkll is incredibly light driven and converts wind pressure smoothly and comfortably into acceleration. We tested all angles in a wide span of wind conditions, and the performance we experienced out there was much more than you expect from any other performance cruiser. It seriously moves in conditions where most other yachts are usually using their motor.
X4.6 Mkll is also a perfect example of a boat where it makes sense to play with trimming. You don’t have to be a champion sailor to feel the acceleration after marginal changes of sheeting points, back stay tension and some of the other parameters available in a true performance cruiser.
The X4.6 Mkll is so well supported by the stability that comes when a yacht is designed and built X-Yachts way. An incredibly stiff and light vacuum infused sandwich hull, a solid rod rig, and 40% of the boat’s weight in the keel. All of it based on the iconic steel frame that X-Yachts has been using successfully for decades. It is simply world class sailing.
The cockpit under sail
The cockpit is where the MkII differs most from its predecessor, and the first sail was also its first test under load. The new German Mainsheet now comes with a redesigned traveler for optimized and effortless trimming.
The longer coamings provide the helmsman a secure seat when the boat is under heel and slips any water by, without getting wet. The extended coaming also lifts the helmsman for better view with the mainsheet winch and traveler an armlength away.
In practice, the helmsman can trim the mainsail from the wheel without handing the steering to the autopilot. That makes a 46-foot performance cruiser noticeably easier to sail actively, particularly with a small crew.
What else is new
Beyond the cockpit, the MkII has the S-bow of the latest Pure X models, with an integrated bowsprit and anchor arm that allows for an optional larger anchor without contact with the bow.
The hull windows are 35% larger letting more natural light into the owners, salon and aft cabins. The optional bow and stern thrusters are also upgraded to more powerful versions with a hold-function, that makes harbor maneuvers comfortable and safe.
Below deck there is more storage in the owner's cabin, new upholstery, and side windows with integrated blinds.
The construction follows X-Yachts practice: a vacuum-infused epoxy hull that makes a lighter and stronger hull, with the yard's galvanized steel frame. The frame distributes loads from the rig and keel, generating all power from the rig and keel into a comfortable end effortless forward movement. And like all other X-Yachts since 1981- very safe.
First public showing
A week after the first sail, the X4⁶ MkII was shown to the public for the first time at the X-Yachts open house in Haderslev. The response was strong, both from visitors on the day and from clients in advanced talks about a boat. The Yard confirms that already five X4⁶ MkII have been sold.
High quality service
Wide range of vessels